Doyle Sailmakers

The Class main is specified using the Stratis process with Carbon Fiber and High Modulus Twaron. The sail is manufactured utilizing a UV Film for the ultimate durability. The UV film reduces the exposed light, which can lead to fiber breakdown.

The Carbon Fiber and High Modulus Twaron fibers offer incredible thread line strength and efficiency, essential to handle the high leach loads of a large mainsail. The Stratis layout is also superior to any other process. Additional fibers can be placed in any area of the sail for added strength. The only other system that allows for this is building the sail out of panels.

The mainsail on the Farr-40 must cover a very broad range, its ability to be powered up or bladed out will be critical. The backstay is the primary control for this function, and thus it will need to be adjusted frequently.

Farr 40 Stratis Code 1

I= 16.20 J= 4.705 LP= 105%

Code 1 Includes:

1 Full Top Batten
3 Long Removable Battens
(All Battens RBS Tapered)
Draft Stripes
Leech and Foot Lines

Telltales and Window
Measurement
UV Film
Full Turtle Bag

The Code 1 is designed for 0-10 TWS. The sail is manufactured using Carbon Fiber and HM Twaron, as the entire sail must carry its strength throughout. UV Films are also used for increased durability.

The Headstay is set at its longest position with this sail for max power and pointing. Removable battens are incorporated in all the jibs to facilitate transporting the sails. In addition, this sail is built to the class max girth.

Stratis Layout
14,000 Carbon Fiber and High Modulus
Twaron UV Protective Films

Farr 40 Stratis Code 2

I= 16.20 J= 4.705 LP= 105%

Code 2 Includes:

1 Full Batten
3 Long Battens
All RBS
Fiberbond Corners
Draft Stripes

Leech and Foot Lines
Telltales and Window
Measurement
Gray UV Films
Sail Bag

The Code 2 is designed for 8-18 TWS. The sail is manufactured using Carbon Fiber and HM Twaron, as the entire sail must carry its strength throughout. UV Films are also used for increased durability.

The Headstay is set at Medium position with this sail for max power and pointing. Removable battens are incorporated in all the jibs to facilitate transporting the sails. In addition, this sail is built to the class max girth.

Stratis Layout
20,000 DPI Carbon Fiber and
High Modulus Twaron UV Films

Farr 40 Stratis Code 3

I= 16.20 J= 4.705 LP= 105%

Code 3 Includes:

1 Full Batten
3 Long Battens
All RBS Battens
Draft Stripes
Leech and Foot Lines

Telltales and Window
Measurement
Gray UV Films
Turtle Bag

The Code 3 is designed for 17+ TWS. The sail is manufactured using Carbon Fiber and HM Twaron, as the entire sail must carry its strength throughout. UV Films are also used for increased durability.

The Headstay is set at Heavy position with this sail for max power and pointing. Removable battens are incorporated in all the jibs to facilitate transporting the sails.

Stratis Layout
26,000 DPI Carbon Fiber and
High Modulus Twaron UV Films

Farr 40 Stratis Code 4

I= 16.20 J= 4.705

Code 4 Includes:

1 Full Batten
3 Long Battens
All RBS Battens
Head Pennant
Draft Stripes

Leech and Foot Lines
Telltales and Window
Measurement
Gray UV Films
Turtle Bag

The Code 4 is designed for 24+ TWS. The sail is manufactured using HM Twaron, as the entire sail must carry its strength throughout. UV Films are also used for increased durability.

The Headstay is set at Max Heavy position with this sail for max power and pointing. Removable battens are incorporated in all the jibs to facilitate transporting the sails.

Stratis Layout
26,000 DPI HM Twaron UV Films

Farr 40 Full Symmetrical

I= 16.20 SPL= 4.705

Spinnakers Include:

Fiberbond Corners
Choice of Colors
Luff and Leech Lines

Sail Numbers
Measurement
Spinnaker Turtle

Code 1S VMG:
This sail is used for downwind legs in light conditions. This sail is designed as a VMG/AP so you can reach with it in the lighter air and press down in the puffs. There are fewer mid panels making the sail as light as possible.

Code 2S Runner:
This sail is designed as an AP/Runner. The sail can be used in 17 TWS at the lowest angles.

Code 3A AP:
The Code 3A is designed to overlap the upper end of the .5 Runner. This sail is designed for Heavy Running conditions.

Doyle Full Radial Layout
Code 1S VMG Contender Superlite
Code 2S Runner Contender Superlite or AirX-600
Code 3A AP .75 Contender Superkote or AirX-700

For more information or to order Farr 40 sails:
1) Contact your local DOYLE loft
2) Email us at info@doylesails.com
3) Call us at 1-800-94-DOYLE

Doyle Sailmakers Offshore One Design Division
Your One-Design Specialists