Following the success of our sails in the Etchells, Solings, J/70, J/105 and many other One Design classes, Doyle Sails has redesigned the J/24 inventory to match new building construction techniques and class rules. Our J/24 Tuning Guide will help you tune the rig and trim the sails, allowing the crew to concentrate on tactics and speed. Enjoy going faster than ever with your J/24 Doyle sails.
J/24 SPEED CLINICS
If your fleet is interested in hosting one of our on the water J/24 speed and tuning clinics, please give us a call early to schedule a weekend before your next season.
The mainsail is designed with a shorter leech to move the max girth higher, projecting more area where there is more wind. Some of the luff curve is removed, allowing the center of effort of the sail to move back. These two design aspects prove to be faster and produce sails that point higher than other sails.
Note: you will need to pre-bend the mast no more than 1 ¼.
GENOA - Our J/24 Genoa is designed to be used in drifting conditions of up to 18 knots. The sail remains flat in medium to heavy winds and, by moving the Genoa lead forward and increasing headstay sag, can power the sail up by making it rounder for light winds. This sail fits in a wide range of sea and wind conditions.
WORKING JIB - When the wind is over 20 knots, there are always waves that make it difficult to drive the boat. It is necessary to power up to waves to keep the boat speed, without heeling excessively. The Doyle Working Jib is full in the foot for power and flat in the top of the sail for easy driving. In winds over 25 knots, move the lead back to flatten the sail and twist the leech off.
Our spinnaker is a runner. Our designers have increased the upper third of the sail with an elliptical configuration, wide shoulders and flat medium section to project more area. This sail will allow you to
Get in touch with an expert below or contact your local loft here
MEET THE TEAM